Description

Seal your acrylic work with a transparent, satin acrylic layer which is breathable, permanent and protects against uv damage.

What it does:

• 100% acrylic polymer varnish adds a satin sheen, protects and resists dirt retention.
• Dries clear to a flexible, non-tacky, hard surface.
• Increases brightness and colour saturation.
• Adjusts and unifies surface sheen.
• Improves surface durability – ideal when shipping or exhibiting.
• Protects colours from uv light damage.
• Resists discolouration – yellowing and fogging – caused by humidity, heat and uv.
• Depending on the substrate it allows surface moisture to pass through and breathe.
• Allows for easy cleaning without fear of damaging the acrylic paint film.
• Has excellent levelling properties – will not hold brush marks.
• Semi-opaque when wet, transparent when dry.
• Use on flexible or rigid supports.
• Designed for interior and exterior use.

How to use it:

• As this is permanent, do a patch test first.
• Before varnishing ensure paint surface is fully dry (72 hours-two weeks Depending on thickness).
• Ensure your space is well ventilated and dirt and dust-free.
• Place the artwork flat on a surface – always varnish horizontally.
• Stir gently before use.
• Use long, even strokes, covering the surface top to bottom while moving from one side to the other – don’t go over bits you have missed, but leave to dry and then re-varnish area.
• While applying, look for surface bubbles and even them out immediately.
• Apply 1-2 thin coats, allowing at least three hours dry time between coats.
• If you require more than two layers, first use gloss varnish as a base layer and build to your desired thickness, then apply satin varnish as your top coat.

How not to use it:

• Do not shake or vigorously over-brush as this can result in surface bubbles and a foggy, hazy look when dry.
• Don’t apply with a roller or sponge brush.
• Do not thin with water.
• Don’t apply in one thick coat, but several thin coats, to avoid brush marks, drips and cloudiness.
• Don’t go back over areas you have already done, as this can cause clouding.
• Don’t attempt to remove once applied.
• Do not use with any non-acrylic media.